844.754.6500

Archive by Author

Composite Molding Bladders

19 Aug

Dynamic Rubber has made a variety of custom and off the shelf bladders for the use in composite molding. Using a bladder allows for uniform pressure to be applied for lamination, adhesive and other applications where uniform pressure is needed across a surface. These are typically custom designed parts so consult DRI for application specific […]

New Equipment

29 Jun

New Equipment recently added: Lab extruder – This was added to allow DRI to extrude custom parts used in our molding application. 50 Ton Press – Allows DRI to mold larger and more complex parts including custom corners, fully molded seals etc. 15 meter long oven – Allows DRI to make longer parts with no […]

Type 5 – Grooved Seal Profiles

12 May

Click Section for PDF Tapered Profile Cross-Section Height Width Expansion Standard Materials DR116 DR25 DR20 DR92 DR9 DR61 DR128 DR33 DR10 DR68 DR51 DR34 DR35 DR119 DR120 0.25 0.31 0.394 0.450 1/2 0.71 0.74 0.75 5/8 0.75 0.827 1.00 1.00 1 7/8 1 7/8 0.250 0.39 0.551 0.570 5/8 0.83 0.79 0.87 1.00 1.00 1.06 […]

Inverted Square

12 May

Click on section for PDF File Note: Some browsers the table does not line up correctly. Please consult DRI if you are having problems Expansions are approximate and vary with pressure please consult DRI Inverted Profile Cross-Section Height Width Expansion Standard Materials DR83 DR44 DR133 DR93 DR82 DR58 DR172 DR140 DR22 DR81 DR115 DR64 DR98 […]

Square / Rectangle Profiles

12 May

Click on section for PDF Expansions are approximate and vary with pressure please consult DRI. Square Profile Cross-Section Height Width Expansion Standard Materials DR11 DR244 DR185 DR188 DR43 DR14 DR78 DR57 DR167 DR179 DR165 DR70 DR42 DR63 DR97 DR134 DR94 DR100 DR40 0.20 1/4 .53 .571 0.40 1/2 0.39 0.47 1.5 1.181 1.23 1.25 1.00 […]

Round Base Profiles

09 May

Click section for PDF file Expansions are approximate and vary with pressure please consult DRI Cross-Section Height Width Expansion Standard Materials DR49 DR65 DR5 DR122 DR6 DR29 DR7 DR8 DR12 DR89 DR91 DR13 DR142 DR220 DR66 DR17 DR138 DR139 DR48 (CIRCLE) 0.155 0.22 1/4 1/4 1/2 1 9/16 1/2 3/4 3/8 1/2 1/2 1/2 .14 […]

Foot Base Profiles

09 May

     Foot Base Profiles Click on the section for a PDF drawing Cross-Section Height Width Expansion Standard Materials DR247 DR1 DR62 DR87 DR86 DR99 DR2 DR113 DR53 DR3 DR3A DR3L DR3M DR127 DR4 DR84 DR32 .36 7/16 1/2 1/2 5/8 .79 9/16 5/8 3/4 7/8 7/8 .93 7/8 1 3/4 1 2 1/2 1 .65 […]

Fabric Reinforced Inflatable Seal Profiles

09 May

Fabric-Reinforced Seals – Dynamic Rubber works with a variety of fabrics including Kevlar, Dacron, Nylon and Fiberglass.  Fabric are chosen depending on the application.  DRI will offer to match any competitors cross-sections.  Please contact us for further details. Fabric seals are hand molded so consult with DRI on specific applications and material available.   Other […]

© 2019 Dynamic Rubber, Inc. All rights reserved.